Top 10 Dome Array Manufacturers

A dome array is a pre-assembled carrier of metal domes, supplied on adhesive-backed polyester so a switch maker can drop an entire keypad’s worth of tactile contacts onto a PCB or flex circuit in one step instead of placing individual domes by hand. That single component decides how the finished keypad feels, how consistently it actuates over its service life, and how much labour the assembly line consumes.

Because the dome layer sits inside membrane switches, medical device front panels, automotive HMI modules and wearables, the dome array manufacturer a project team chooses ends up shaping both the tactile specification and the production schedule. The category is growing with the interfaces it serves. According to Grand View Research, the global membrane switch market was valued at USD 7.2 billion in 2025 and is projected to reach USD 11.0 billion by 2033, expanding at a CAGR of 5.4% from 2026 to 2033 (Grand View Research).

The list below is a research-based shortlist, not an official market ranking. Companies are ordered by how closely their published product range matches dome array work, how much verifiable detail they disclose about production, and how visible they are in export markets. All details come from company websites and public company materials, checked in November 2026.

Quick Comparison Table

Company NameRegionBrief Introduction
Snaptron, Inc.United StatesDedicated metal dome and dome array manufacturer in Windsor, Colorado, also building the placement and test equipment that goes with them.
NicomaticFranceFrench maker of Switch’Air tactile domes and key dome arrays, with domes produced on adhesive labels ready for assembly.
Qingdao Shanyo Precision Electronic Technology Co., Ltd.ChinaMetal dome, dome array and membrane switch manufacturer founded in 2004, with in-house tooling and automated array assembly.
Shin-Etsu Polymer Co., Ltd.JapanInput device division of the Shin-Etsu group, producing metal domes, touch switches and silicone contacts in series.
CMD Manufacture Co., LimitedChinaDongguan dome and dome array factory with a no-tooling standard catalogue and a high export share.
Hoffmann + Krippner GmbH & Co. KGGermanyGerman membrane switch and custom HMI manufacturer running printing, stamping and assembly in-house.
RAFI North America, Inc.United StatesMilwaukee membrane switch and capacitive sensor plant, formerly Xymox, with tactile dome layers added since 1983.
Best Technology Co., Ltd.ChinaShenzhen and Dongguan dome and dome sheet supplier that has served the membrane switch industry since 1999.
Shenzhen Zigeng Technology Co., Ltd.ChinaBONSDA-branded Shenzhen manufacturer pairing dome arrays with tact switches, DIP switches and encoders.
CSI KeyboardsUnited StatesMassachusetts custom membrane switch and keypad builder with US engineering and assembly for demanding markets.

1. Snaptron, Inc.

Snaptron, Inc.

Introduction

Snaptron is based in Windsor, Colorado, in the United States, where it manufactures metal dome switches, metal dome arrays and the automation and test equipment used to place and verify them. The company produces everything at a 42,000 square foot facility and sells directly rather than through distributors, which keeps engineering questions inside the building. Its standard range covers 15 dome styles from 4 mm to 37 mm in diameter with actuation forces from 40 g to 6,800 g.

Standard Peel-N-Place arrays are built to work with either manual placement or automated pick-and-place equipment, and custom dome work is quoted on lead times as short as four to six weeks. The company has been supplying tactile switch components for more than three decades, which is why its catalogue is often the reference point other dome array manufacturers are measured against.

Features

  • Standard and custom metal dome arrays in a wide force and diameter range
  • Peel-N-Place array formats for manual and automated assembly
  • Companion placement, test and automation equipment from the same supplier
  • Direct engineering contact with custom lead times from four to six weeks
  • Applications beyond membrane switches, including appliances, automotive and medical devices

Meilleur pour

Best for: North American OEMs that want domes, arrays and the assembly equipment to handle them from a single domestic source.

2. Nicomatic

Nicomatic

Introduction

Nicomatic is headquartered in Bons-en-Chablais, France, and its tactile domes and key dome arrays are designed and manufactured in France. The Switch’Air dome range uses stainless steel domes in standard diameters of 6, 8.4, 10 and 12.2 mm with trip forces from 170 g to 420 g and nickel or gold finishes.

Arrays are supplied on adhesive carriers so the liner lifts off and the whole sheet bonds to a PCB or flex circuit in one operation, and the company also supplies domes mounted on adhesive labels for automated assembly. Nicomatic reports more than 40 years of experience with dome production and guarantees its Switch’Air domes for one million actuations, with some variants tested beyond that. Domes with a central hole are available for designs that need an LED underneath the membrane.

Features

  • Patented non-stick dome geometry that reduces sticking during pick-and-place
  • Key dome arrays on adhesive carriers, plus label-mounted domes for automation
  • Standard diameters from 6 mm to 12.2 mm with nickel or gold plating
  • Variants with a hole for LED backlighting
  • French manufacturing with published actuation and contact resistance data

Meilleur pour

Best for: European membrane switch and keypad builders who need pre-positioned arrays that drop straight onto an automated line.

3. Qingdao Shanyo Precision Electronic Technology Co., Ltd.

logo

Introduction

Shanyo is based in Qingdao, Shandong, China, and was established in 2004 as a manufacturer of metal domes, dome arrays, membrane switches, die-cut parts, light guide films and flexible circuits. The company runs a Qingdao headquarters that concentrates R&D and tooling with an 80-person engineering team, plus production in Rizhao and Dongguan and a self-owned plant in Vietnam, supported by sales and technical offices across Asia and the United States.

It reports 200-plus staff, registered capital of RMB 20 million and component accuracy of 0.01 mm with a two million cycle verified service life. Certifications cover IATF 16949, ISO 13485, ISO 9001, ISO 14001 and ISO 45001, which is the combination automotive and medical buyers usually ask for first. Automated dome array assembly and inspection equipment is developed in-house.

Features

  • Metal domes, dome arrays, membrane switches, die-cut parts and flexible circuits
  • In-house tooling plus 15 progressive stamping presses with daily output above 500,000 pieces
  • Self-developed CCD inspection and automated array lamination and testing
  • Rizhao plant rated at up to five million pieces per month with a reported 99.8 percent yield
  • IATF 16949, ISO 13485, ISO 9001, ISO 14001 and ISO 45001 certification

Meilleur pour

Best for: buyers who need a dome array manufacturer able to move from DFM review and prototypes into automotive or medical qualified volume production.

4. Shin-Etsu Polymer Co., Ltd.

Shin-Etsu Polymer Co., Ltd.

Introduction

Shin-Etsu Polymer is headquartered in Otemachi, Chiyoda-ku, Tokyo, Japan, and operates as part of the Shin-Etsu Chemical group. Its input device business produces metal domes alongside rubber contacts, short stroke switches, touch switches and pads, and in-mould parts, most of it built on the group’s silicone rubber materials.

The company serves automotive, electronics equipment, medical, watch, banking and laboratory markets, and it is one of the few dome suppliers that also controls the elastomer side of a keypad stack. Because it is a listed corporation with group-level quality systems, documentation for material grades and process control tends to be thorough, which shortens qualification work for regulated products. Metal domes here are one line inside a much broader component portfolio rather than the whole business.

Features

  • Metal domes produced alongside rubber contacts and silicone keypads
  • Touch switches, short stroke switches and pressure sensitive devices from the same division
  • Group-level materials development, including silicone and polymer films
  • Documented quality systems suited to automotive and medical qualification
  • Long-standing supply relationships with Japanese and international OEMs

Meilleur pour

Best for: projects that need domes and elastomer keypads qualified together under one Japanese quality system.

5. CMD Manufacture Co., Limited

CMD

Introduction

CMD Manufacture is registered in Dalingshan Town, Dongguan, Guangdong, China, and concentrates on metal domes, snap domes, tactile domes and metal dome arrays. The company maintains a large catalogue of standard domes in C, F, T and O series shapes, which means most orders need no new tooling, and it offers a standard one-key array format aimed at buyers already using peel-and-place sheets.

The factory covers about 5,000 square metres with 101 to 200 employees and runs an ISO 9001 quality system. Export makes up the large majority of sales, mainly to Europe and the Americas, with the Middle East, Southeast Asia and Africa also listed. Applications run from membrane switch panels to remote controls, medical equipment and automotive controls.

Features

  • Broad no-tooling standard dome catalogue in four shape families
  • Standard one-key dome arrays plus custom array layouts
  • ISO 9001 quality management with documented incoming and final inspection
  • Export-oriented operation with European and American markets as the main outlets
  • Domes used across membrane switches, handheld devices, medical and automotive panels

Meilleur pour

Best for: small and mid-volume programmes that want to avoid tooling charges and start from a stocked standard dome.

6. Hoffmann + Krippner GmbH & Co. KG

Hoffmann + Krippner GmbH & Co. KG

Introduction

Hoffmann + Krippner is a family-owned German manufacturer based in Buchen in the Odenwald, with a US subsidiary in Frisco, Texas, and around 240 employees. Rather than selling domes as loose parts, it builds the switch panel around them: custom membrane switches, membrane potentiometers, printed sensors, cleanroom medical keyboards and touchscreens, all produced with screen printing, stamping, assembly and electrical and optical testing under one roof.

The company has been in business since 1973 and holds DIN EN ISO 9001, ISO 14001 and ISO 13485 certification, the last of which matters for medical device work. It is part of the HK.SYSTEMS group, which adds electronics, housings and IoT capability when a project needs a complete control unit.

Features

  • Custom membrane switches and keypads with tactile dome layers
  • Membrane potentiometers and flexible printed sensors
  • Cleanroom production for medical keyboards and panels
  • In-house screen printing, stamping, assembly and functional testing
  • ISO 9001, ISO 14001 and ISO 13485 certification with German production

Meilleur pour

Best for: European medical and industrial equipment builders who need the complete front panel engineered and assembled, not just the dome layer.

7. RAFI North America, Inc.

RAFI North America, Inc.

Introduction

RAFI North America is located in Milwaukee, Wisconsin, in the United States, and was known until 2023 as Xymox Technologies, a membrane switch manufacturer founded in 1979. The plant runs from a 60,000 square foot facility with roughly 90 employees and has been ISO 9001 certified since 1997. Dome switches were added to its membrane switch line back in 1983, so tactile metal dome layers have been part of the production routine for four decades.

The company also prints capacitive touch sensors, graphic overlays and specialty circuitry in-house, and it became part of the German RAFI Group in 2023, gaining access to a wider HMI product range that includes touchscreens, joysticks and control electronics. Medical device and industrial control work are its two stated market strengths.

Features

  • Membrane switches with tactile dome layers, plus capacitive touch sensors
  • In-house screen printing of conductive inks, die cutting, laminating and assembly
  • Graphic overlays and complete front panel assemblies
  • ISO 9001 quality system in place since 1997
  • Access to the wider RAFI HMI portfolio through group ownership

Meilleur pour

Best for: North American medical and industrial OEMs that want a domestic panel builder handling both dome-based and capacitive interfaces.

8. Best Technology Co., Ltd.

Best Technology

Introduction

Best Technology is based in Shenzhen, Guangdong, China, with production in Dongguan, and has supplied metal domes and dome arrays to the membrane switch trade since 1999. Its catalogue covers round domes, four-leg domes and triangle domes with legs, the last of which reach trip forces up to 6,000 g and suit heavy-force control keys where accidental actuation has to be prevented.

Metal dome sheets and light guide films are offered alongside the domes, and the company works on OEM and ODM basis from customer drawings or samples. Quality control follows ISO 9001 procedures across incoming material, production, testing, packing and dispatch. Applications include membrane switches, remote controls, handheld devices, ATMs and automotive panels, sold to both domestic and export customers.

Features

  • Round, four-leg and triangle dome shapes, including heavy-force variants
  • Metal dome arrays and dome sheets cut to customer layouts
  • Light guide films supplied with the dome range
  • OEM and ODM work from drawings, samples or reference parts
  • ISO 9001 process control from material intake to dispatch

Meilleur pour

Best for: switch makers needing unusual dome geometry or high-force tactile keys in modest quantities.

9. Shenzhen Zigeng Technology Co., Ltd.

Shenzhen Zigeng Technology Co., Ltd.

Introduction

Shenzhen Zigeng Technology, which sells under the BONSDA brand, was founded in 2015 and is based in Shenzhen, Guangdong, China. It combines dome and switch production with a trading side that supplies complementary components, so a buyer can source metal dome arrays, metal dome switches, tact switches, rotary DIP switches, encoders and membrane switches from one order.

The company presents itself as an OEM and ODM manufacturer, integrating R&D with production and emphasising stable tactile feel and service life in its switch products. It exhibits at electronics trade fairs in China and publishes technical notes on dome switch applications and membrane switch design. Compared with older dome specialists, its published manufacturing data is thinner, but the component breadth is useful for smaller builds.

Features

  • Metal dome arrays and metal dome switches produced in-house
  • Tact switches, rotary DIP switches, encoders and membrane switches from one source
  • OEM and ODM support for custom switch specifications
  • Technical guidance on dome switch and membrane switch applications
  • Active presence at Chinese electronics trade exhibitions

Meilleur pour

Best for: smaller OEMs that want dome arrays plus matching tact or DIP switches consolidated into a single purchase order.

10. CSI Keyboards

CSI Keyboards

Introduction

CSI Keyboards is based in Peabody, Massachusetts, in the United States, and has designed and manufactured custom membrane switches, keypads and human-machine interface assemblies since 1982, when it started in Salem, Massachusetts. Its output covers membrane switches, silicone rubber keypads, capacitive touch controls, display assemblies and integrated HMI units, with custom backlighting, environmental sealing and ruggedised construction.

The company reports more than 3,500 custom HMI products and around 150 new designs a year, with concept to design in as little as two weeks and design to part in four to five weeks. Manufacturing and assembly run from an ISO 9001:2015 certified facility, with overseas partners used for high-volume production. Medical, military, aerospace, industrial, marine and automotive markets are the main outlets.

Features

  • Custom membrane switches and keypads built around tactile dome layers
  • Silicone rubber keypads, capacitive touch and display assemblies
  • Backlighting, environmental sealing and ruggedised options
  • ISO 9001:2015 certified facility with in-house engineering and assembly
  • Fast prototyping, with concept to design in as little as two weeks

Meilleur pour

Best for: US-based project teams that need engineering support and a finished keypad assembly rather than loose domes.

Comment choisir le bon fabricant de matrices à dôme

Selecting a dome array manufacturer comes down to more than brand recognition. Product fit, quality systems, production capacity, delivery reliability, market experience and after-sales support all affect whether the arrays arrive on spec and stay on spec across a production run. Four checks do most of the work.

Evaluate Product and Technical Fit

Start with the tactile specification: diameter, trip force, rebound force, travel and expected life. Confirm the dome material and plating, whether the array needs a spacer or ventilation channels, and whether an LED opening is required. Ask how the supplier validates force consistency across a production lot, because a dome that feels right in a sample can drift once stamping tools wear. If the design is still moving, check whether the supplier offers DFM feedback before tooling is cut.

Verify Quality Standards and Certifications

ISO 9001 is the baseline. Automotive programmes usually require IATF 16949, and medical devices require ISO 13485 along with material traceability and change control. Ask for certificates rather than website claims, and confirm which plant holds them, since group-level certification does not always cover the line that will run your order.

Review Production Capacity and Lead Times

Capacity shows up in press counts, array assembly lines and monthly output figures. A supplier with no-tooling standard domes can ship samples in days, while custom shapes need tooling and typically two to six weeks. Match that against your ramp plan, and ask what happens to lead times during peak season or when a tool needs rework.

Consider Market Experience and Support

Ask which industries the supplier already serves, and request references from a comparable application. Sample policy, minimum order quantity, response time and language coverage decide how smoothly a project runs after the purchase order. A supplier who answers technical questions during evaluation is usually the one who answers them during a quality issue.

Conclusion

The dome array manufacturers in this list fall into three groups. Dedicated dome specialists such as Snaptron, Nicomatic, CMD and Best Technology concentrate on the tactile component itself and offer the deepest standard catalogues. Diversified component groups such as Shin-Etsu Polymer and Shanyo combine domes with elastomer keypads, membrane switches and flexible circuits under one quality system, which suits buyers who want fewer suppliers to audit. Panel builders such as Hoffmann + Krippner, RAFI North America and CSI Keyboards take the opposite approach and deliver the finished front panel with the dome layer already laminated in place.

The right choice follows from the brief. If the requirement is a bare array with a precise force curve, start with the specialists and compare their published tolerance and life data. If the project needs automotive or medical certification, filter for IATF 16949 or ISO 13485 and confirm the specific plant is covered. If volume is uncertain, favour a supplier with a no-tooling catalogue, and if the panel itself is the deliverable, a panel builder removes a layer of coordination. Whichever route you take, sample the dome in the real keypad stack before committing, and hold the supplier to the same four checks used above: fit, certification, capacity and support.

Table des matières

Catégorie de blog

Nous contacter

Une entreprise de confiance depuis 2004
Plus de 200 experts. Une présence internationale au Vietnam, en Corée, en Malaisie, à Singapour et à Taïwan. Nous proposons des solutions de dômes métalliques de précision pour l'électronique grand public, l'automobile, les dispositifs médicaux et la domotique.

Blogs associés

Request a Quote

Courriel

Téléphone

Adresse

Usine n° 20, parc industriel de Tianhe, n° 252 Weihe Road, zone de développement économique et technologique de Qingdao

Défiler vers le haut

Obtenir une demande de renseignements